Advertisement
How do I hook up the Nike PSA200 player with my computer?
For Windows98 users
, make sure that you have already installed the software in your PC. The software and the driver
installation must be completed before making any connection or else the PSA player will not be recognized by your PC.
For WindowsME/2000/XP users
player to the USB port on your PC. An application will launch and the unit will be recognized as a USB Mass Storage Class
device and listed as Removable drive in Windows Explorer automatically, therefore no separate installation of driver
is required.
1.
Turn on your computer
(Always turn on the computer before hooking up the player)
2.
Connect the supplied USB cable to your computer's USB port (with the bigger end of the cable connected to the
computer).
3.
Press the
button at the back of the base unit to open the battery cover latch, connect the small end of the USB
cable to USB IN jack inside the compartment.
4.
A wavy line should show on display of the PSA200.
(Back to Top)
, as the PSA200 player both support USB Mass Storage Class, simply hook up the
Advertisement
