Canon VIXIA HFS11 Instruction Manual page 27

• If the indicator flashes quickly, refer to Troubleshooting
(OJ
151).
To remove the battery pack
1 Slide
[BATTERY RELEASE)
in the
direction of the arrow and hold it
pressed down.
2 Slide the battery pack down and
then pull it out.
o
IMPORTANT
• Turn off the camcorder before connecting or disconnecting the com-
pact power adapter. After pressing
[POWER]
to turn off the camcorder,
important data is updated in the memory. Be sure to wait until the green
ON/OFF (CHG) indicator goes out.
• We recommend charging the battery pack in temperatures between
·10 °C and 30°C (50 of and 86 oF). Outside the temperature range of
o
°C to 40°C (32 OF to 104 oF), charging will not start.
• Do not connect to the camcorder's DC IN terminal or to the compact
power adapter any electrical equipment that is not expressly recom-
mended for use with this camcorder.
• To prevent equipment breakdowns and excessive heating, do not con-
nect the supplied compact power adapter to voltage converters for
I
overseas travels or special power sources such as those on aircraft and
ships, DC-AC inverters, etc.
CD
NOTES
• The battery pack will be charged only when the camcorder is off.
• If remaining battery time is an issue, you can power
the
camcorder
using the compact power adapter so the battery pack will not be con-
sumed.
• Charged battery packs continue to discharge naturally. Therefore,
charge them on the day of use, or the day before, to ensure a full
charge.
Preparations.
27