Sony Trinitron KV-13TR28 Operating Instructions Manual page 12

Connecting TV Antenna/Cable
Orolalal-xondialem s1e}¢a@Anlamr-lalem Ol alamvelccialatchs)
Use the EAC-66 U/V mixer (not supplied).
Prepare the VHF antenna end using the appropriate
connector (p. 11).
2 Connect the cables to the mixer.
3 Attach the mixer to the VHF/UHF terminal.
When the U/V mixer is used
Snow and noise may appear in the pictures when viewing cable TV channels over 37 (W + 1).
(Ofolafarctea diate mm Oniexol=mvanccialels
Use the dipole antenna.
Attach the supplied antenna connector
to the end of the dipole antenna cable.
Put the dipole antenna into the slot at the top of the TV.
Plug the dipole antenna connector into
the VHF/UHF terminal at the rear of
the TV.
Adjust the dipole antenna for
better picture quality.
For better picture quality, we would recommend you to connect an outdoor antenna.
12 | Chapter 1: Setting Up