Pentax IQZoom 105 WR Operating Manual page 45

Correcting the date
Switch the power on.
1. Depress the DATE button for 3 seconds, the
"Year" digits and will blink.
2. Each time the DATE button is depressed, the
blinking digits changes in the following mannen
Year - Month - Day - Time - Minutes
Stop depressing the button when desired digits
appear.
3. Move the zoom lever to the right or left, when
you wish to change the blinking digits. The dig¬
its increases by one each time the lever moves to
the ri^t and the digits decrease by one each
time the lever moves to the left. Holding the
zoom lever for about one second will change the
digits continuously.
4. After the data has been adjusted, depress the
DATE button repeatedly untU blinking stops.
• The blinking "minutes" allows precise fine-
tuning of the internal clock to the beginning of
a specified minute. To do so, when "minutes
digits" are blinking, depress the DATE button
in sync with a time signal. ^
• If you release the shutter while the blinking
data is being corrected, the data cannot be im¬
printed.
Operational precautions
• The data on the LCD panel is imprinted on
each frame you expose.
• "Year-Month-Day" and "Day - Hour - Minute"
cannot be imprinted at the same time.
• The dating unit automatically switches the im¬
print mode between the standard and panorama
according to the format mode selected.
• If there is a white or yellow object in the comer
of the picture where the data is imprinted, the
data may be difficult to read. When composing
your photographs, try to avoid brightly-colored
subjects in that comer.
41