Controller Description; Initial Commissioning - Dimplex TRP 150 X Installation And Operating Instructions Manual

TRP 150 X
4.

Controller description

4.1. Operating panel
1 2 3
1 Manual operation, Enter
2 Energy efficiency indicator
3 Automatic operation
4 Boost button
5 Display
Child lock / block
Heating operation on
Energy efficiency
Window monitoring
Heating program P1-P6
Presence detection
Automatic operation
Comfort temperature
ECO temperature
Frost protection temperature
6 Temperature selection key
7 On/off switch
8 Temperature selection key
4.2. Key functions
On/off
Switching the device on or off.
Automatic operation
Activation of automatic operation with weekly pro-
gram.
Manual operation
Room temperature control by specifying:
Comfort temperature,

ECO temperature (lower temperature),

Frost protection temperature.

Window monitoring
Interruption of heating operation when window is
open.
www.dimplex.eu
4
8 7 6 5
Keys + and –
Navigation through the menu and changing the set-
ting values.
4.3. Display
Shows the current settings. The display lights up for
approx. 10 seconds (factory setting) when a key is op-
erated.
Display for heating operation "on"
During heating operation, the
When the specified temperature is reached, the sym-
bol disappears.
Energy efficiency indicator
The indicator informs the user of the energy con-
sumption based on the configured room temperature.
Arrow on green: low energy consumption

Arrow on red: high energy consumption

NOTE
For particularly energy efficient operation, it is recom-
mended to run a weekly program and to set the room
temperature at max. 19 °C.
5.

Initial commissioning

Supply voltage to the device. The display will show
.
Press the key to switch on the device. The LED in-
dicator will light up green.
NOTE
An extended interruption in the power supply can re-
sult in an incorrect time display. In this case, it will
have to be reset.
2302/A
symbol appears.
In this display, use the + and – keys to
enter the time using the HH:MM for-
mat and then confirm by pressing
Each value can be changed when it
flashes.
In this display, use the + and – keys to
select the weekday and then confirm
by pressing .
The weekdays are shown on the dis-
play as follows:
LU = Monday,
MA = Tuesday,
ME = Wednesday,
JE = Thursday,
VE = Friday,
SA = Saturday,
DI = Sunday
English
.
EN-5