Step 2: Setting Up; Using The Remote Control - Sony Trinitron KV-27XBR45 Operating Instructions Manual

Step 2: Setting up
1dal-Ma-ielelecmae)alage),
Insert one size AA (R6) battery (supplied) by matching
the + and - on the battery to the diagram inside the
battery compartment.
Notes
¢ With normal use, the battery should last for approximately six
months.
¢ If you do not use the remote control for an extended period of
time, remove the battery to avoid possible damage from
battery leakage.
¢ Do not handle the remote control roughly. Do not drop it, step
on it or let it get wet.
¢ Do not place the remote control in direct sunlight, near a
heater, or where the humidity is high.
el
Using the remote control
This remote control has three different operation
modes which are selected by sliding a switch on the
upper left side of the remote control. The three
operation modes are (1) for normal TV viewing, (2) for
operating video equipment, and (3) for using the PIP or
P&P features. The functions that are necessary for each
of the operations appear in the button windows as the
switch is moved up or down.
For normal TV viewing
Variable indicator
area .
Indicates MODE selected
Set the selector to the >
lowest position.
12 | Getting Started
For operating video equipment
MUTING ——POWER--,
Case) CW)
{— - >
CaO GHIO owed |
(50 S 1 0 G10 |
| CO GEICO GAs 2)
CwvTal) (CH= O)
Indicates VTR selected
Set the selector to the —>|
middle position.
MUTING aa bowen a
Oaaad |
| (POSITION O (SWAP O CTVNIDEO O |
! |
CQ 002 Gas O|
|
CO GAO}
| Sos eo eee
TVNIDEO TV JUMP.
O@@.
Rear of the remote control
| cz Oca
|
REEZE
Indicates PIP selected
Set the selector to the —>'
highest position.
ee
VTR 1-2-3
selector