Step 1: Connecting The Tv - Sony Trinitron KV-13M20 Operating Instructions Manual

Step 1: Connecting the TV
You can use an indoor antenna, outdoor antenna, or cable
system with your TV. Outdoor antennas or cable TV
systems usually provide the best picture quality.
Connecting an Indoor, Outdoor
or Cable Antenna
Connect your antenna or cable to the TV's VHF/UHF
antenna terminal.
A sVHE onty 75-ohm coaxial cable
or " :
or
Cable
If you cannot connect your antenna or cable directly to the
TV antenna terminal, follow one of the diagrams below.
BsvHFonly 300-ohm twin lead cable
or
UHF only
or
VHF/UHF
Antenna connector
(see Specifications on page 16 for models)
Cc 75-ohm coaxial cable
and
EAC-66 U/V
mixer
ft (not supplied)
300-ohm twin lead cable
Connecting to a Cable TV System
Through a Cable Box
If your cable system requires use of a cable box, make the
connection as shown below.
Cable (6) VHF/UHF
Cable box
Connecting a VCR
See your VCR instructions to set up the VCR. After
connecting the VCR to the TV, you will be able to do the
folowing:
¢ Watch video tapes
¢ Record one TV program while viewing another
Check the model number of vour TV and select the
appropriate connection diagram.
Notes
¢ Ifvour cable system requires use of a Cable Box, install it
between the antenna cable and the VCR.
* Fora monaural VCR, connect the audio output of the VCR to
ALDIO L (MONO) on the TY.
* Connect your S-Video cable (KV-20V60 only) to the S-VIDEO
input on the TV.5-Video will override your standard video
input, providing the mast stable picture. S-Video does not
provide audio output.
YDA & BulydaUUOD e XOg ajqe>d e BulydaUUOD e EUUajUY Ue BUIaUUOD e AL 24} HulZz2UUOD « suo!Ne>D pue sHhulUseEMH