Table of Contents
Advertisement
Shut-off valve
Adapter (optional) 1/2" outlet
Extension pipe
Valve with right angled elbow
Cooker hose with bayonet fitting
Connection piece
Gas feeding tube
Risk of explosion by damage of
| the cooker hose!
The cooker hose
must not be
clamped, bent or trapped or
come into contact with hot parts
of the appliance.
Connection to the mains supply
This appliance must be
earthed!
Our company shall not held
responsible for any damage
caused by using the appliance
without earthed socket.
Risk of electric shock, short
circuit or fire by unprofessional
installation!
The appliance may be connected
to the mains supply only by an
authorized qualified person and
the appliance is only guaranteed
after correct installation.
Risk of electric shock, short
circuit or fire by damage of the
mains lead!
The mains lead must not be
clamped, bent or trapped or
come into contact with hot parts
of the appliance.
If the mains lead is damaged, it
must be replaced by a qualified
electrician.
The mains supply data must
correspond to the data specified on
the rating plate of the appliance. The
rating plate is either seen when the
door or the lower cover is opened or it
is located at the rear wall of the
appliance depending on the appliance
type.
The supply cable of the appliance
must correspond to the specifications;
see technical data table Technical Data,
page 5.
The plug should be easily
accessible after installation (but
not above the hob).
The moulded plug on this appliance
incorporates a 13A fuse. Should the
fuse need to be replaced an ASTA
approved BS1362 fuse of the same
rating must be used. Do not forget to
refit the fuse cover. In the event of
losing the fuse cover, the plug must
not be used until a replacement fuse
15 | EN
Advertisement
Table of Contents
