Electrical Connection - Tricity Bendix TB 57 L Operating & Installation Instructions Manual

Electrical Connection
A
Any electrical work required to install this
appliance should be carried out by a
qualified electrician or competent person.
This appliance must be earthed.
The manufacturer declines any liability should
these safety measures not be observed.
Electrical Requirements
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance
rating plate.
The appliance is supplied with a 13 amp plug fitted. In
the event of having to change the fuse in the plug
supplied, a 13 amp ASTA approved (BS 1362) fuse
must be used. Should the plug need to be replaced
for any reason. The wires in the mains lead are
coloured in accordance with the following code:
Green and Yellow: Earth
Blue: Neutral
Brown: Live
The wire coloured green and yellow must be
connected to the terminal marked with the letter „E" or
by the earth symbol @ or coloured green and yellow.
The wire coloured blue must be connected to the
terminal „N" or coloured black.
The wire coloured brown must be connected to the
terminal marked „L" or coloured red.
Upon completion there must be no cut, or stray
strands of wire present and the cord clamp must be
secure over the outer sheath.
This appliance complies with the following
E.E.C. Directives:
- 73/23 EEC
of 19.02.73 (Low Voltage Directive)
and subsequent modifications,
- 89/336 EEC
of 03.05.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.
14