Table of Contents
Advertisement
To cancel the edit mode
Press ■ STOP after recording has finished.
stop
j
If the cassette deck has no SYNCHRO
EDIT terminal
Press the play button of the cassette deck at the
same time as pressing ► PLAY on the CD player
to start recording.
•When the deck has reverse mode, set to one-way (
T~~
).
•When the recording for side A is finished, the CD player will go to
the pause mode. The cassette deck will keep recording.
•To record on side B, first press the stop button on the cassette
deck, then start recording again on side B while at the same time
pressing ► PLAY on the CD player.
To change the programmed contents
■ Press SIDE A/B to indicate the desired tape
side.
SIDE A/B
■ To enter additional tracks at the end of side A
or B, press the numeric button.
(See page 14.)
■ To clear the last track on the tape side A or B,
press CLEAR.
CLEAR
■ To clear and re-enter the last track on side A or
B, press CLEAR and press the numeric button
for the new track.
CLEAR
o
>10
0123456789
10
□□□□□□□□□□□a
■ To clear a track in the middle of the sequence,
press RECALL to display the track number to
be cleared and then press CLEAR.
RECALL
CLEAR
Advertisement
Table of Contents
