Setting The Soundbar; Samsung Soundbar And Hospitality Tv - Samsung HG32NJ690F Install Manual

09 Setting the Soundbar

Samsung Soundbar and Hospitality TV

• Samsung Soundbar and hospitality TVs support the HDMI ARC feature If you connect a compatible Samsung
Soundbar to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to the TV's sound
through the Soundbar.
• Sound bar Out in Hotel Option menu makes you control to where the TV sound is outputted when the TV is turned
on.
– Hotel Option (MUTE > 1 > 1 > 9 > SelectE) > System > Sound Bar Out
• If Sound bar Out set to on, the TV sound is automatically outputted in the Soundbar device only whenever TV is
turned on.
• If Sound bar Out set to off, the TV sound is automatically outputted in the TV speaker only whenever TV is turned on.
• Use the Samsung Soundbar that supports the ARC function.
Setting the Soundbar to Hotel Mode
1. Set the following options in Hotel Option (MUTE > 1 > 1 > 9 > SelectE):
– System > Sound Bar Out > ON
– Power On > Power On Volume > User Defined
– Power On > Power On Volume Num > set greater than 0
– Power On > Max Volume > set greater than 0
2. Connect an HDMI cable from the HDMI out port of the Soundbar to the HDMI IN (ARC) port on the TV.
3. After the Soundbar is connected to the TV, when the TV turns on, the Soundbar automatically detects the TV, and
then automatically switches to Hotel Mode.
Soundbar features in Hotel mode
• Power on / off is synchronized with the TV.
• HDMI-CEC defaults set to on
• Avaiable only through the HDMI out port.
• Disables the "Input mode" key on the VFD to prevent unexpected audio-source changes.
• Acquires adjustable Power On and Max Volume settings from the TV's Hotel Option menu. However Soundbar's
Power On Volume and Max Volume values are set to half of Power On Volume and Max Volume settings in the TV's
Hotel Option menu.
– If the TV's Power On Volume = 20 and Max Volume = 90, then Soundbar's Power On Volume = 10 and Max
Volume = 45.
• To use Voice Guide while an external device is connected to the DIGITAL AUDIO OUT (OPTICAL) or HDMI IN (ARC)
terminal, be sure to select PCM or Dolby Digital at MENUm > Sound > Expert Settings > Digital Output Audio
Format.
– The audio formats may differ depending on the external device.
English - 46