Toro 39514 Operator's Manual page 13

Use the hour meter/tine engagement display to show
the following information generated by the smart
controller/electronic depth control system:
Aerating Hours Electronic depth
control setting
indicator for the
tines
Alert and Error Engine Hours
Messages
Battery voltage Interlock status
Refer to Using the Smart Controller/Electronic Depth
Control (page 19) for more information.
Hour Meter Display
The hour meter (Figure
engine hours.
Note:
The engine hours display when the ignition key
is in the position or while the engine is running.
OFF
The engine hours do not display while the machine
is aerating.
1. LCD Indicators/Information screen
2. Hour display
3. LED status light
Tine Engagement Display
The tine engagement display
shows the electronic tine depth setting.
Parking brake
indicator
Maintenance
Reminders and
Alerts
LED Status Light
8) monitors and displays total
Figure 8
(Figure 9) monitors and
1. LCD Indicators/Information screen
2. Tine depth status bar
3. Tine depth setting indicator
4. LED status light
LED Status Light
The LED status light is located at the right side of the
hour meter/tine engagement display
Figure 9).
The LED is multi-colored to indicate the system status.
Parking-Brake Handle
The parking-brake handle is located on the control
console, to the right of the key switch
Note:
The brake handle engages a parking brake in
each of the transmissions.
•
To engage the parking brake, pull the handle back
toward you.
g211730
•
To release the parking brake, push the handle all
the way forward away from you.
When parking on a slope, chock or block the wheels
in addition to engaging the parking brake. Tie down
the machine and engage the parking brake when
transporting the machine.
Ignition Switch
The Ignition switch is located on the right side of the
control console
Use the Ignition key to start and shut off the engine.
The switch has 3 positions: O
(Figure 10).
13
Figure 9
(Figure 8
(Figure
(Figure 5).
, O , and S
FF N
g211731
and
5).
TART