Kenwood KE-894 Instruction Manual page 9

Operating instructions
@ Using the equalizer effect
Preparation:
Set the TAPE MONITORS switch of the arnolifrer or
receiver connected to this unit
1 Press the POWER swich of this unit to ON.
INPUT SELECTOR Key
3
=
Reeaned
wet |
+
a) eee
| Numeric keys (1-5) RIM key | £Q. CONTROL keys
i
EFFECT key
POWER switch
2 Set the INPUT SELECTOR to LINE.
INPUT SELECTOR
ware
3 Press the EFFECT key.
Lignts up
E-ther ina:cator tights ua
4 Recall the equalizer patterns.
Either inaicator lights up.
Reference mode: Tne REFERENCE indicator lights up
Select from R1 to R5 (REFERENCE MEMO ji
\See the ist of equalizer patterns on oage 10.)
Nomenc <eys {1-5}
To cancel equalizer effect
* The pattern shown in the display does not change
Manual mode. The MANUAL. indicator Inghts up.
Select from M?t to M5 (MANUAL MEMO.)
(See the list of equaiizer patterns on page 10.)
Numeric keys (1-5}
* In this mode, desired patterns can be created.
{See "Storing Your Own Patterns' on page 12.)
KE-894 /2060 En) 9