Advertisement
Take 1pcs camera unit assembled in LCM line, then
S11
locate the camera unit into the pins of the middle
frame.
Move the bracket and put it on the back of panel,
S12
then connect the LVDS cable to the connector of the
panel module.
Use a Philips-head screwdriver to tighten 4pcs
screws for locking the bracket chassis with the
S13
panel, then connect the touch cable to main board.
(No.1~4 Screw size= M3x4, Torque=5±1kgfxcm )
2
5. Disassembly and Assembly Procedures
3
4
1
Connect the camera cable to the camera board, then
use a Philips-head screwdriver to tighten 4pcs
S14
screws for locking the camera unit with the frame.
(No.1~2 Screw size= M3x3.5, Torque=3±0.5kgfxcm;
No.3~4 Screw size= M3x8, Torque=6±0.5kgfxcm)
1
3
Take a pair of speakers to locate the probers of the
middle frame, then locate the speakers' cable to the
hooks of the middle bezel, and then connect the
S15
speaker's cable to the connector of the main board.
Take 1pcs panel lamp cable to connect the main
board with the panel.
Use a Philips-head screwdriver to tighten 6pcs
screws for locking the two speakers with the middle
S16
frame, then paste 2pcs aluminum foil on the specific
positions to cover the LVDS connector and cables.
(No.1~6 Screw size= M3x6, Torque=4~5kgfxcm)
2
1
2
4
3
6
5
4
Advertisement
