Philips Avent SCF323 User Manual page 7

You can also use the dishwasher (top rack only) or hand wash in warm, soapy water, and
then rinse thoroughly. We recommend you to sterilise all the parts contacting with breast
milk in our Philips Avent steam steriliser, or by boiling for 5 minutes. Avoid to contact with
the vessel directly to protect the parts from deformation.
Caution
• Take care when cleaning the valve and the silicone diaphragm. If it gets damaged,
your breast pump will not function properly.
• To clean the valve, rub it gently between your fingers in warm soapy water. Do not
insert any object as it may cause damage.
Assembling
To assemble the pump, follow the steps below.
Note
• Make sure that you clean and sterilise the pump as instructed in this user manual.
• Make sure that you assemble the pump correctly as instructed in this user manual.
• To avoid leakage, remove the residue around the rim before assembling. Put the bottle
onto the pump body, and do not over-tighten.
• Wash your hand thoroughly before you take the sterilised components.
1 Insert the valve into the pump body from underneath.
2 Put the bottle onto the pump body and turn it anticlockwise
to fix it. Do not over-tighten when assembling the bottle to
the pump body.
English 5
1
2