Setting Of The Interface (Rs-232C) - Nikon OT-8A Repair Manual

V. EXTERNAL OUTPUT AND INITIAL SETTING
©
Setting single-eye PD mode, both-eye PD mode
—» Press the [6] and [0] keys.
The following menu appears:
HO,
—
PO
select —
1. R PD, L PO
2. R+L PO
9. ax it
0. set
select ?
• Use the single-eye PD mode. —> Press the [1] and [0] keys.
Use the [R] and [L] keys to move the right and left eyes, respectively, up to
25-40 mm, one eye at a time.
• Use the both-eye PD mode. —» Press the [2] and [0] keys.
Move the right and left eyes together up to 50-80 mm.
• To return to the original measurement data display. —> Press the [9] key.
• Return to the measurement data display. -» Press the [9] key.
5. Setting of the Interface (RS-232C)
—> Press secret key.
—> Press the [3] and [0] keys in sequence.
The following menu appears:
NO. — interface
—
1
. RS232C chi
2.
RS232C ch2
3.
1 data direct n
4.
data out 9. exit
0
.
set
select ?
V - 12
Repair Manual