Nikon OT-8A Repair Manual page 22

V. EXTERNAL OUTPUT AND INITIAL SETTING
CD Specify the print format in which data is printed on the printer built in the OT-8A
operation unit. —» Press [1] and [0] keys in sequence.
Tlie following menu appears:
NO.
—
print format —
1
.
subj (FI.F2 Nl, N21
2. subj + obj (REF, LH)
3. subj + eye
4. s + o + eye
9. exit
5. no print
0. set
select ?
• To print only subjective data measured on OT-8A. —» Press [1] and [0] keys in
sequence.
• To print subjective data measured by OT-8A, objective data measured by the auto
refractometer [REF], and data measured by the auto lensmeter [LM], —» Press [2]
and [0] keys in sequence.
• To print subjective data measured on OT-8A and eye ball prints. —»Press [3] and
[0] keys in sequence.
• To print subjective data measured by OT-8A, objective data measured by the auto
refractometer [REF], data measured by the auto lensmeter [LM], and eye ball
prints. —> Press [4] and [0] keys in sequence.
• If you do not use the printer built in the OT-8A operation unit. —> Press [5] and [0]
keys in sequence.
• To return to the data listing screen. —> Press [9] key.
©
Specify which format is given priority, positive or negative, when entering a spherical
power (SPH) from the ten-key pad on the OT-8A control panel.
-4 Press [2] and [0] keys in sequence.
The following menu appears:
NO. — sign of SPH
—
1
. minus sign
2.
plus sign
9. exit
0
. set
select ?
• To give negative format priority. —» Press [1] and [0] keys in sequence.
V - 4
Repair Manual