Table of Contents
Advertisement
---------------------------------------------------------------------------------------------------------
Note:
• Hot Key 1 and Hot Key 2 can`t repeat the same function.
• Hot Key 1 default is (Modes), Hot Key 2 default is (Brightness).
• Because some functions limit the Hot Key to be gray out and unavailable.
• Hot Key can define of : (Modes, Brightness, Volume, Gamma, Contrast, Low
Blue Light, Over Drive, VRB).
9.
DDC/CI: Allows the monitor settings to be set through the software on the PC.
-----------------------------------------------------------------------------------------------------------
Note: DDC/CI, short for Display Data Channel/Command Interface, which allows
monitor controls to be sent via software.
10. HDMI Black level: Select to set HDMI black level.
11. Quick start mode: Select Off or On. Turn on to speed up boot speed.
12. Deep sleep: When Deep Sleep is set to on and there is no signal, the monitor will enter
sleep mode, this mode can save power consumption.
Save Setting to...(User mode only)
Mode - User
Picture
Game Mode: Ac�on
Game Mode: Racing
Color
Game Mode: Sports
Audio
Gaming
OSD
System
Save se�ng to...
Move
Enter
1.
Press the MENU key to open the OSD.
2.
Toggle the joystick to the up or down to select "Save Setting to..." from the OSD.Then
toggle to the right to navigate to the element you wish to adjust and press the joystick
to enter it.
3.
Save Setting to Game mode: There are three user-defined profiles available. When
you have decided what settings suit you, save them and system will be able to recall
the settings in the future when you turn on gaming mode .
X
Advertisement
Table of Contents
