Honda CB1100 2018 Owner's Manual page 111

Remove the drive chain from the driven
5.
sprocket by pushing the rear wheel
forward.
Remove the rear axle shaft and adjusting
6.
plates.
Lock nut
Rear axle shaft
7.
Adjusting
bolt
Drive chain
Installation
1.
Adjusting
plate
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
Tyre Puncture
Remove the brake caliper bracket, rear
wheel and side collars.
Support the brake caliper assembly so
u
that it doesn't hang from the brake
hose. Do not twist the brake hose.
Avoid getting grease, oil, or dirt on the
u
disc to pad surfaces.
Do not push the brake pedal while the
u
wheel is removed.
To install the rear wheel, reverse the
removal procedure.
Take care to prevent the brake caliper
u
from scratching the wheel during
installation.
Removing Wheels
u
Continued 107