Installation
Attach the right and left side collars in
1.
their original locations on the wheel.
On the left side, place the wheel between
2.
the fork legs and insert the lightly greased
front axle shaft to the end, through the
left fork leg and wheel hub.
Align the end of the front axle shaft with
3.
the surface of the fork leg.
Surface of
the fork leg
End of the
front axle shaft
Tyre Puncture
Tighten the left axle pinch bolts to hold
4.
the axle.
Tighten the axle bolt.
5.
Torque: 59 N·m (6.0 kgf·m, 44 lbf·ft).
Loosen the left axle pinch bolts.
6.
Tighten the right axle pinch bolts.
7.
Torque:
CB1100CA
26 N·m (2.7 kgf·m, 19 lbf·ft).
CB1100NA
22 N·m (2.2 kgf·m, 16 lbf·ft).
Removing Wheels
u
Continued
103