Download Print this page

Spark Arresting Screen In Muffler; Spark Plug - Stihl MS 261 C-M Instruction Manual

Hide thumbs Also See for MS 261 C-M:

Advertisement

Available languages

Available languages

English
26 Spark Arresting Screen in
Muffler
WARNING
To reduce the risk of fire caused by hot particles
escaping from the machine, never operate the
machine without a spark arresting screen, or with
the spark arresting screen damaged. Do not
modify the muffler or spark arresting screen. To
reduce the risk of fire from accumulated debris
such as pine needles, branches or leaves,
ensure that the muffler plugs are in place before
taking up work.
NOTICE
According to the law or regulations in some
countries or federal states, certain operations
may only be carried out if a properly serviced
spark arresting screen is provided.
► If the engine is down on power, check the
spark arresting screen in the muffler
► Wait for the muffler to cool down
1
► Undo screw (1)
► Pull out the spark arresting screen (2)
► Clean the dirty spark arresting screen, replace
if damaged or heavily carbonized
► Refit the spark arresting screen
► Insert the screw
► If the muffler plugs are missing or damaged,
mount new plugs

27 Spark Plug

► If the engine is down on power, difficult to start
or runs poorly at idle speed, first check the
spark plug.
► Fit a new spark plug after about 100 operating
hours – or sooner if the electrodes are badly
eroded. Install only suppressed spark plugs of
the type approved by STIHL – see "Specifica‐
tions".
30
2

26 Spark Arresting Screen in Muffler

27.1
Removing the Spark Plug
► Remove the shroud – see "Shroud".
► Pull off the spark plug boot.
► Clean away loose dirt from around the spark
plug.
► Insert the combination wrench through the
grommet (1) and turn it as necessary to
engage the spark plug's hexagon.
► Push the combination fully home against the
cylinder.
► Unscrew the spark plug.
27.2
Checking the Spark Plug
► Clean dirty spark plug.
► Check electrode gap (A) and readjust if neces‐
sary – see "Specifications".
► Rectify the problems which have caused foul‐
ing of the spark plug.
Possible causes are:
– Too much oil in fuel mix.
– Dirty air filter.
1
A
0458-153-8221-C

Advertisement

loading