Advertisement
•
'.
GETTING STARTED
Operation
CAUTION
Be sure to
turn
the
HP-75
off
before
plugging
anything into an external port.
Failure to do so may damage the
computer
or the plug-in unit.
To assemble a simulator system,
end
of
the
cable
into
any
edge of your HP-75.
you need only to plug the
connector
on
the
one of the three external ports on the
front
The HP 82713A Plug-In Module Simulator System
Up to three simulators may be plugged into the external
ports
at
the
same
time.
If
only one or two simulators are used, they may be plugged into any
of the ports in any order.
7
Advertisement
