Table of Contents
Advertisement
No.
Icon
BLANK
15
16
17
Install remote control batteries
1. Open the remote control battery cover.
2. Insert the supplied batteries, ensuring the positive and negative ends are facing in the
correct direction.
The supplied batteries are provided for your convenience so that you can operate the display straight
away. You should replace them as soon as possible.
3. Put the cover back on.
One key for blank screen. Go to
Blank button on remote to set up different blank mode.
Microphone
The USB receiver to pair with the remote control. See
remote control on page 13
Description
> Display > Advanced options >
for details.
12
Use BenQ Board by
Advertisement
Table of Contents
