Advertisement
Contents
Connections
TV
TV Input
Set this when playing audio from a TV on this unit. When the TV is turned
on, this unit turns on and the input source is automatically switched to
"HDMI" or "Optical" so that the audio from the TV can be played through
this unit.
o Default Input
Set the input source to be used when playing audio from the TV
through this unit. Set this according to the jack on this unit being used
to connect to the TV (HDMI ARC or OPTICAL IN).
None / HDMI Out (ARC) / Optical In
(Default: HDMI Out (ARC))
Front/Top
Rear panel
panel
Playback
Settings
o Auto-Play
When a TV audio source is input to this unit, the unit automatically
switches to the input source set in "Default Input" and the Auto-Play
function for playing TV audio on this unit is set.
On
(Default):
Off:
0 The Auto-Play function does not work when "Default Input" is set to "None".
0 The Auto-Play function will not work if the sampling frequency of the audio
93
Remote control
unit
Tips
Enables the Auto-Play function.
Disables the Auto-Play function.
Set "Default Input" in advance.
signal input from this unit's OPTICAL IN input terminal is 88.2 kHz or more.
TVs normally output 48 kHz audio signals and the Auto-Play function will work,
but if you connect a device that outputs an audio signal of 88.2 kHz or more
and try to use it, the Auto-Play function may not work.
Index
Appendix
Advertisement
