Advertisement
Contents
Connections
H/P Amplifier Gain
Set the gain of the headphone amplifier. Set this according to the
impedance of the connected headphones. It is recommended that this is
set on the "Low" side if the headphones have low impedance and on the
"High" side if they have high impedance.
Set the gain of the headphone amplifier to
High:
"High". Set this if the volume is too low at
the factory default setting.
Mid
Set the gain of the headphone amplifier to
(Default):
"Mid".
Set the gain of the headphone amplifier to
Low:
"Low". Set this if the volume is too high at
the factory default setting.
NOTE
0 The headphone volume varies depending on the H/P Amplifier Gain setting.
Decrease the volume or mute the audio first if changing this setting while listening
to audio.
Front/Top
Rear panel
panel
Playback
Settings
Speaker Optimization
Performs audio processing optimized to our SC-N10 speakers (not
included) and outputs an audio signal.
On
(Default):
Off:
92
Remote control
unit
Tips
Performs audio processing optimized to our
SC-N10 speakers (not included).
The response is flat.
Index
Appendix
Advertisement
