Aiwa LX-110 Operating Instructions Manual page 8

PROGRAMMED PLAY
Up to 20 tracks can be programmed from the inserted disc.
Use the remote control.
7 Press the SET button in stop mode.
"M" flashes on the display.
2 Press the numbered buttons and +10 button to
program track.
Example:
To select the 12th track, press the +10 and 2 buttons.
To select the 20th track, press the +10, +10 and 0 buttons.
Selected track number
Program number
v
Total number of
programmed tracks
Programmed track
numbers
Total playing time
3 Repeat step 2 to program other tracks.
4 Press the Il button to start play.
7 ENGLISH
To check the program
Each time the <4 or PI button is pressed in stop mode, a
track number and program number will be displayed.
To clear the program
Press the ll button in stop mode.
To add tracks to the program ;
Before playing, repeat step 2. The track will be programmed
after the last track.
To change the programmed tracks
Clear the program and repeat all the steps again.
¢ During programmed play, the following operations cannot be
performed.
- Random play
- One-track repeat (REPEAT 1). :
¢ If the programmed time is more than 99:59 minutes, or the
disc track number 31 or above is programmed, the display
shows --:-- as the total playing time.