Sony M-425 Operating Instructions Manual page 4

Sh
Recording
Make sure that nothing is connected to MIC.
1 (M-627V/677V/727V only) Press the reset button of
the TAPE COUNTER.
2 Press M4 and insert a standard microcassette with
the side to start recording facing the lid.
3 Select the desired tape speed.
2.4.cm for optimum sound (recommended for normal
use): A 30-minute recording can be made using both
sides of the MC-30 microcassette.
1.2 cm for longer recording time: A 60-minute
recording can be made using both sides of the MC-30
microcassette. H
4 (M-527V/627V/677V /727V only) Set VOR to H, L or
OFF. i
If you set VOR to H or L, the unit automatically starts
recording the sound and pauses when there is no
sound (you can save tapes and batteries).
H: To record at meeting or in a quiet and/or spacious
place.
L: To record for dictation or in a noisy place.
When the sound is not loud enough, set it to OFF, or
the unit may not start recording.
5 Press @.
Recording starts. While the tape runs, the REC/BATT
tamp (M-627V /677V/727V only) lights and flashes
depending on the strength of the sound.