Tripp Lite LC1200 Owner's Manual page 3

Quick In
Connect your computer
1
or electronics to the Line
Conditioner, and the
Line Conditioner to an
electrical outlet.
A. Exchange the Line Conditioner's cord with
your equipment's cord. Connect the Line
Conditioner cord's male plug into a Line
Conditioner receptacle. Connect its female
plug into the equipment's male input.
B. Connect the equipment cord's male plug
into a wall outlet. Connect its female plug into
the line conditioner's male input.
Connect additional
2
equipment to the Line
Conditioner in the same
manner.
Additional cords and receptacle adapters are
available to accommodate most outlet
configurations.
Turn on your Line
3
Conditioner's power
switch.
Note: (select models) Source Voltage
Matching Switch
Set the source voltage matching switch to
either 208, 220 or 240 volts to match the
input voltage being used.
stal
lation—220/240V-50/60 Hz
3