Rear Panel - Tripp Lite HT810ISOCTR Owner's Manual

Features
F "Current Usage" LED Meter: allows you to get the maximum use from your Console Component
Power Center by showing you the total amperage load of all of your connected components. A yellow
LED serves as a warning; a red LED indicates current usage is too high and action should be taken to
reduce the connected load.
"Input Voltage" LED Meter: clearly shows voltage variations of incoming utility power. A yellow
G
LED serves as a warning; red LEDs indicate voltages are outside of the nominal range (either too low
or too high). The Console Component Power Center can alert you to abnormal voltage, but cannot
regulate it. If persistent low or high voltage conditions continually affect equipment performance,
consider purchasing a Tripp Lite UPS system or line conditioner.
Front Panel Outlet: provides a convenient power source (with surge suppression and line noise
H
filtering) for devices not normally part of your component system, including game systems, video
recorders or battery chargers. Turn power on and off at this outlet with the "Master" Switch.
Rackmount Hardware: allows mounting in standard sized racks.
I
Removeable Console Feet: allow placement on a shelf as a console component within a
J
system. Unscrew feet prior to rackmounting the Console Component Power Center.

Rear Panel

K Line Cord with Right-Angle Plug: connects Console Component Power Center to a standard 3-wire
grounded 120V AC, 60 Hz. wall outlet. Right-angle plug allows equipment and
furniture to be moved flush against the wall.
Rear Panel Outlets: protect connected equipment against surge damage and line noise
L
distortion on the AC line. Turn power on and off at these outlets with the "Master" Switch.
1-Line Tel/Modem Protection: includes built-in jacks which protect connected equipment against
M
surge damage and line noise distortion on a single dial-up line. A built-in splitter (one jack in and two
jacks out) allows you to simultaneously protect and connect two devices sharing a single line.
3-Line High Definition (HD) Compatible Coaxial Protection: includes three sets of gold coaxial
N
"F" connectors that protect components on three DSS satellite, cable or antenna lines simultaneously.
Coaxial protection is compatible with all digital signals for High Definition (HD) video.
Not Shown
Unit/Cord Labels: coordinate Console Component Power Center outlets with component power
cords for easy identification.
Audible Alarm: immediately alerts you to damaged internal protection circuitry. If this occurs,
contact Tripp Lite Customer Support.
(continued)
3