Kohler K-3556 Installation Instructions Manual page 5

Open the supply shut-off valve and check all connections
for leakage. If the connections have been properly
assembled, a slight retightening of the nuts should stop
any leakage.
If the toilet is leaking between the tank and the bowl,
carefully retighten the three brass nuts evenly.
Periodically check all the bowl and tank connections for
leakage for several days following installation.
Install the toilet seat according to the seat manufacturer's
installation instructions.
Fig. #9
Adjust the float by using the wing nut on the float arm until
Screw
Wing Nut
the water level is close to the marked water line.
Float Arm
Final adjustment should be made with the screw at the top
of the float valve. Turn this screw counterclockwise to
raise the water level and clockwise to lower the water
level.
Set the tank cover in place on the tank.
Fig. #10
BA
114834-2- (-) 5