Tone Settings - Opel CD 60 Manual

16 Introduction
3. Answer No:
The language of menu texts is
changed.
The prompt language remains
unchanged.
4. Answer Yes:
You will be prompted to insert the
languages CD in the navigation
DVD/ CD slot for the Infotainment
system.
5. Remove the navigation DVD/CD
by pressing the b button.
6. Insert the languages CD and
select the Continue menu item.
7. Select the desired language from
the list.
The selected prompt language is
loaded from the languages CD.
Loading can take several minutes.
Caution
Do not switch off the Infotainment
system or the ignition under any
circumstances while loading is in
progress.
Do not start the engine under any
circumstances while loading is in
progress.
Do not press any button on the unit
while loading is in progress.
After successful loading, you will be
prompted to remove the languages
CD and to re-insert the navigation
DVD/CD.
Ignition lock logic
The Infotainment system is normally
switched on and off with the e knob.
When the system is switched on, it
can be switched off and back on again
by retracting and/or inserting and
turning the ignition key.
This ignition lock logic is activated as
a factory setting, but can be
bypassed.
Switching ignition lock logic on/off
Switch the ignition lock logic on or off
by confirming the Ign. logic menu
item.
With the ignition lock logic switched
off, the Infotainment system can only
be switched on and off with the e
knob.
The automatic switch-off is
independent of the ignition lock logic
and therefore always remains active.

Tone settings

The settings for Bass, Treble and
Sound can be set separately for radio
and CD/MP3).
The settings for Fader and Balance
apply to all sources and cannot be set
separately.
Select the desired source (FM/AM or
CD/MP3) for which you want to adjust
the sound.
Press the SOUND button to recall the
Sound menu.