Prince Castle CTS Operation Manual page 3

Vertical contact toasters
Table of Contents

Advertisement

 
Equipment must be elevated from the floor at all times
during cleaning and operation.
Remove bun infeed by lifting
4
from toaster. Remove any
packing material.
Open the conveyor doors.
5
For each door, lift slightly
from the bottom to unlatch
and guide down to the
surface. Remove any
packing material.
Clean the bun infeed,
6
conveyors and inside of
the doors. Put on neoprene
gloves. Dampen a clean
cloth with lukewarm soap
and water. Wipe the
conveyor, rotating it as you
clean to reach its entire
surface. Wipe the infeed
and inside of the doors.
Wipe down each part again
with a fresh, clean,
sanitized cloth.
Close the conveyor doors.
7
301-500revA-EN
Installation (continued)
CAUTION
Clean the outside of the
8
toaster. Using a clean cloth
with lukewarm soap and
water, wipe the outside of the
entire toaster. Wipe again
with a fresh, clean, sanitized
cloth.
Install release sheet. Hang
9
the folded Teflon release
sheet, straddling the platen.
Reinstall the bun infeed.
10
Plug unit in. Plug unit
11
into a grounded
receptacle with a
matching plug
configuration.
All electrical connections must be in accordance
with local electrical codes and any other applicable
codes.
This appliance can be used by children aged from 8
years and above and persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance.
3
CTD & CTDE
Vertical Contact Toasters
WARNING
Printed in USA 04/19 © 2019

Advertisement

Table of Contents
loading

Table of Contents