Turning On The Power - Sony LBT-G1000 Operating Instructions Manual

AM Antenna Connection AC Power Cord
Connect the supplied loop antenna to the AM and At
terminals.
You can attach the loop antenna on the wall using
commercially available screws.
Connect Qie AC power cord to a wall outlet
Note
Memories stored in the unit may be lost when the AC power
cord is disconnected for a certain period of time.
Turning on the Power
For better reception
In addition to the loop antenna, connect an insulated wire of
20- to 50- feet (6 to 15 meters) to the AM terminal (the lower
terminal). Be sure not to disconnect the loop antenna.
Adding Other Components to the System
Connecting a video equipment (for LBT-G1000)
You can connect a video equipment to the VIDEO IN jacks
only for the audio input signal.
To select the video equipment, press the VIDEO button.
Note
When this system is turned on, noise may occur during radio
reception or in the picture and sound of the video
equipments (TV, VTR, etc.). In ttiis case, place this system
away from the video equipments or turn off the power of Ute
unit.
Press the POWER button to turn on the power after
completing all cormections.
Connecting a turntable (for IBT-D150)
You can connect a turntable system (PS-LX56, etc.) to the
PHONO IN jacks. To listen to analog discs, press the
PHONO buHon.
6