Table of Contents
Advertisement
Mf Synchronized performance with
instruments connected to the system.
Using the MIDI, performance of drum machines
and other musical
instruments
can be synchro-
nized with the rhythm of the electronic organ or
vice versa.
©@ If the electronic organ is on the transmitting
side:
(1) The system is set to INT (Internal) when the
power is turned on.
If the
multifunction
display
indicates
the
tempo, the clock (tempo information) of the
electronic organ is already set to INT. There-
fore, all the musical instruments connected
to the electronic organ
are played in the
tempo
of the organ.
If the multifunction
display indicates EXT, carry on the following
procedures.
(2) Turn the MIDI switch off, and depress the
FUNCTION switch.
=
FUNCTION
mie
(3) Depress one of the arrow switches.
Le]
The multifunction display indication changes
from EXT to INT.
(4) Depress the FUNCTION
switch two times to
turn it off.
Using the MIDI function of the electronic organ,
drum
machines
and other rhythm
instruments
connected to the organ can be started or stopped.
These
instruments
follow
the tempo
of the
electronic organ. Start or stop signal is trans-
mitted by operating either one of the followings:
40
(1) If you start or stop the realtime record or play
of the program
sequencer,
start
or stop
signal is transmitted.
If you start or stop the rhythm or automatic
accompaniment, start or stop signal is trans-
mitted.
(3) If you depress a lighted rhythm
selection
button, stop signal is transmitted followed
immediately by start signal.
(4) If you depress the foot (rhythm stop) switch,
stop signal is transmitted.
Note that neither start signal nor stop signal will
be transmitted while you are recording or playing
with the program sequencer if one of the above
(2), (3), and (4) operation is made.
(2
—
@ If the electronic organ is on the receiving side:
(1) If the display indicates EXT
The clock (tempo information) is already set
to EXT (External).
The rhythm of organ is played in the tempo
of drum machines and other rhythm instru-
ments. If the multifunction display indicates
the tempo (meaning that it is set to INT),
carry on the following procedures.
(2) Turn the MIDI switch off, and depress the
FUNCTION switch.
(3) Depress one of the arrow switches.
The multifunction display indication changes
from EXT to INT.
(4) Depress the FUNCTION switch two times to
turn it off.
Note:
@ if the clock (tempo information) is set to EXT...
1)
When the other rhythm instruments starts,
@ |f the PLAY and REAL TIME recording of
the SEQUENCER
is standing by (START
switch is activated), the sequencer starts.
@ If the RHYTHM
is standing by (RHYTHM
switch is activated), the rhythm starts.
@ If both of the sequencer and the rhythm
are standing by, only the sequencer starts.
2)
When
the other instruments stops, the se-
quencer and the rhythm also stop.
3)
When the RHYTHM is standing by,
If the organ receives the keyboard informa-
tion by Ch 2 (LOWER) or Ch 3 (PEDAL), the
rhythm starts.
@ Drum machines and some other rhythm instru-
ments may transmit the clock (tempo information)
irrespective of the start of the rhythm. In such a
case, the electronic organ can start or stop the
rhythm and automatic accompaniment by itself if
the clock is set to EXT.
Advertisement
Table of Contents
