Auto Melody Chord; One Finger, Memory, And Constant Functions - Kawai SR 3 Owner's Manual

5.2 AUTO MELODY CHORD
These two functions add harmony to the UPPER
keyboard melody line in the form of notes from the
LOWER keyboard chord. The first adds the com-
plete chord to the octave immediately below the
lowest note on the UPPER keyboard. The second
spreads the chord over a wider area (open
harmony).
I
Auto meLooy cHorp «=H
Note:
The black circles indicate the notes actually played:
the white notes added by the AUTO MELODY CHORD
function.
5.3. ONE FINGER, MEMORY, and
CONSTANT Functions
These three functions respectively tell the organ to
fill in the rest of a chord from a single note (ONE
FINGER), continue playing chords even after you
have removed your hand from the lower keyboard
(MEMORY), and change the chord accompaniment
to solid (continuous sound — no strumming effect)
chords (CONSTANT).
FINGER
ONE FINGER — This function, which applies to
the AUTO PLAY ORCHESTRA and AUTO MELODY
CHORD allows you to play a complete major chord
with only one finger and others with at most two
fingers: one on the base note and the other on the
touch bars located under the LOWER keyboard.
The touch bars change the major chord into a
minor one; a seventh chord, or the combination,
minor seventh.
23
MINOR ("a
ROLL
ONE FINGER
HAND PERCUSSION
Note:
Activating the ONE FINGER function disables the
touch bars hand percussion function.
MEMORY — This function, which applies to the
AUTO PLAY ORCHESTRA and AUTO MELODY
CHORD functions, repeats the current chord pat-
tern even after you remove your hand from the
LOWER keyboard. It is therefore only necessary to
give the organ the chord changes.
CONSTANT — This function changes the auto-
matic accompaniment to solid chords without
rhythm. You can select STRINGS, BRASS (SR4
and SR3) and REEDS (SR4) tone for CONSTANT.
If you select any other tone, the tone is auto-
matically set to BRASS. The chords sound continu-
ously while the lower keys are being depressed.
The bass tone is selected by tone selection switch
for the PEDAL TIBIA and PEDAL ORCHESTRA. (If
ELECTRIC BASS and STRING BASS tones are
selected, the sound attenuates instead of holding.)
5.4 ONE TWO PLAY
The ONE TWO PLAY function automatically selects
an appropriate registration for the current rhythm
pattern.
Note:
This function is not available for programmed rhy-
thms. Pressing the ONE TWO PLAY switch for the
PROGRAM pattern produces no changes.
©@ Procedure
(1) Press the ONE TWO PLAY switch to auto-
matically change the panel settings to ones
appropriate for the current rhythm pattern.
Y ONE
TWO
PLAY
Note:
lf the ONE TWO PLAY switch is depressed while
one of the registration memory switch 1 ~ 5 is
lighting, the registration memory lamp turns off.
(2) Adjust the registration as necessary.