Advertisement
You can make the follcwing changes before starting play.
To erase the last selection, press the CLEAR button
during stop mode. Each time you press the CLEAR button,
the last selection in the program will be erased.
To delete a selection, press the CHECK button
repeatedly until the ur desired selection is displayed. Then
press the CLEAR button.
if you want to change the order, erase the entire
program by pressing the M button in stop mode, and then
repeat the programming procedure from the beginning.
Ws Felca late Mel od cele] a- facia ce) ae tel hal ale Mz
2) oX<.
You can insert a pause in your program by pressing the 88
button. Use this function to make a program for both sides of
the tape at one time.
1 Program the selections for side A.
2 Press the fl button.
"P" will appear in the display and the total playing time
will be reset to 0.
3 Program the selections for side B.
When you start playing, the selections for side A will be
played and then the unit will pause with the chosen
selections for side B illuminated in the display. Set the
tape to the beginning of side B, then press the > or U5
button. The selections for side B will be played.
What is the tape indicator?
During program play, the tape indicator shows side A or B
being played.
Aww
a0} : Side A is being played.
| ao] : Side A has teen played and the unit is in pause
mode, or side B is being played.
To check the step of programmed selections
Press the CHECK button during stop mode. The number of
programmed steps will be displayed for a few seconds in the
display.
To check the remaining time
Press the TIME button once to check the remaining time of
the selection being played; twice to check the total remaining
time; once more to return to the initial display.
If you have inserted a pause, the display shows the
remaining time until the pause.
(2) appears while checking the program for side A and (5)
appears while checking the program for side B.
Note
When selections have been programmed for sides A and B,
the total playing time displayed during stop mode will show
the selections programmed for side B and the total playing
time for side B.
Designating the Total
Playing Time
You can designate a playing time and the unit will make two
different programs of selections each fitting within that
period. Use this function, by designating the length of your
tape, for editing both sides of a tape.
This feature, called Time Edit, sets the playing time of each
program within the designated time automatically by
choosing selections in numerical order.
You can also program desired selections by priority. In this
case, you can designate desired selections beforehand and
the remaining selections will be programmed to fit the
remaining time.
Display
1
Place a disc on the tray and close it with the
@ OPEN/CLOSE button.
Press the EDIT button and display "EDIT".
te
DOI
OD a
it {2|siets|
2508
Each time you press the él <q / BP PPI button,
the display changes to give you the following
duration.
[
--.--
-—
§=823.00
—
27.00 al
45.00 <——»
37.00
<>
30.00
Advertisement
