Hdmi Connector P200 - HP 524sf Maintenance And Service Manual

HDMI connector P200

524sf, 524sw, 524sh, 524sa, 527sf, 527sw, 527sh, 527sa
Repair the HDMI connector:
1) Use a soldering iron and a desoldering pump to remove as much solder as possible from the pin.
2) Use a soldering iron or hot air gun to melt the solder on the pins.
3) Lift the P200 connector from the PCB.
4) Place the new component on the PCB. Be sure that it matches the PCB footprint.
5) Solder the new component.
32