Table of Contents
Advertisement
with your phone's keypad. If you wish to switch
back to phone view, press
Settings
You can set various parameters such as camera mode,
photo size, effects, etc before you start to take photos.
1.
In preview mode, press left sidekey [Menu] to
access
menu.
Options
2.
After which, press right sidekeys [up/down] or
<
>
/
on the keypad to select a submenu.
Once you have selected a submenu, press left
sidekey
[Mode/Menu]
keypad to select a value. The 9 submenus in the
menu include:
Options
Metermode
You can select Single, Continuous, or
10
sec.
You can select the appropriate
WhiteBalance
WhiteBalance
locations, such as Auto, Sunny,
Cloudy, etc. With proper selection of
the WhiteBalance, the colours of the
photo will look more realistic.
You can select Normal,
PhotoQuality
Superfine
value is Fine.
Multimedia
again.
+
-
or
/
on
for
different
Fine
photo quality. The default
Size
PhotoEffect
Exposure
the
NightMode
Position
Show/Hide
info
or
You can select your desired photo size.
You can select various colour options for
your photos, such as
Close
colour effects), Natural, Bright,
etc.
You can select the exposure value of
the camera to achieve an appropriate
exposure for optimal performance.
The value ranges from -2EV to
+2EV, where default value is 0.
This menu enables you to take high
quality photos even in poor lighting
conditions.
You can select the storage location of
the photos, such as
Phone
You can choose to show or hide
information. If you select
the screen will display the settings
and parameters, if you select
info, the screen will not display such
information.
(to disable
Sepia
or
SD
card.
Show
info,
Hide
59
Advertisement
Table of Contents
