Table of Contents
Advertisement
21-EXTRA DISPLAYS
MANAGING OTHER NOTIFICATION ICONS
The following are other notification icons that must appear on the panel:
The pellet reserve icon appears if the specific sensor (optional) is
installed. The symbol appears inside the crown when the pellet
level drops below the sensor: grey during operation and red in
OFF or STAND BY for START&STOP
The icon does not appear during shutdown and cooling
If the panel is in STANDBY, the reserve icon is displayed alternately
with the icon that indicates the operating mode (or SILENT MODE)
with an interval of 10 seconds each.
The red
icon indicates that the maximum number of
working hours has elapsed, beyond which unscheduled
maintenance is required (e.g. 2000 working hours).
It appears in the STAND-BY and OFF screen (PRODUCT OFF or OFF
FOR START&STOP)
The icon does not appear during shutdown and cooling.
Self-cleaning brazier cleaning
The icon appears after the shutdown and before the cooling stage
in the case of products equipped with a self-cleaning brazier.
The icon appears throughout the brazier handling cycle.
FEED SCREW AUTOMATIC RELEASE
YELLOW ICON
34
If the ON-OFF key turns yellow during operation, it means that the
feed screw is performing a rotation cycle in the reverse direction
to release some pellets in it.
The cycle is automatic and there is no need for user intervention.
Advertisement
Table of Contents
