Table of Contents
Advertisement
4. Remove the battery.
5. Remove the
4G WWAN card
6. Remove the
WLAN
card.
7. Remove the
memory
modules.
8. Remove the
M.2 2230
9. Remove the
M.2 2230 solid-state drive from Slot
10. Remove the
coin-cell
11. Remove the
heat
sink.
12. Remove the
assembly inner
About this task
The following images indicate the system board connectors.
1. WWAN card connector
3. eDP cable connector
5. Display cable connector
7. Solid-state drive Slot 1
9. Battery cable connector
11. USH-cable connector
13. Speaker cable connector
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
84
Removing and installing Field Replaceable Units (FRUs)
or
5G WWAN
card, as applicable.
or
M.2 2280
solid-state drive from Slot 1.
battery.
frame.
2.
2. WLAN card connector
4. Memory modules
6. System fan connector
8. Touchpad cable connector
10. Solid-state drive Slot 2
12. Coin-cell battery cable connector
Advertisement
Table of Contents
