Table of Contents
Advertisement
Table 40. System setup options—Storage menu (continued)
Storage
Enable MediaCard
Secure Digital (SD) Card
Secure Digital (SD) Card Read-Only Mode Enable or disable the SD card read-only mode.
Table 41. System setup options—Display menu
Display
Display Brightness
Brightness on battery power
Brightness on AC power
Full Screen Logo
Touchscreen
Table 42. System setup options—Connection menu
Connection
Network Controller Configuration
Integrated NIC
Enable UEFI Network Stack
Wireless Device Enable
WWAN/GPS
WLAN
Bluetooth
Contactless smartcard/NFC
Enable UEFI Network Stack
Wireless Radio Control
Control WLAN radio
Enable or disable the SD card.
By default, the Secure Digital (SD) Card option is enabled.
By default, the Secure Digital (SD) Card Read-Only Mode option is not
enabled.
Enable to set screen brightness when the computer is running on battery
power.
Enable to set screen brightness when the computer is running on AC power.
Enable or disable full screen logo.
By default, the option is not enabled.
Enable or disable the touchscreen for the operating system.
By default, the option is enabled.
Controls the on-board LAN controller.
By default, the Enabled with PXE option is enabled.
Enable or disable UEFI Network Stack.
By default, the Enable UEFI Network Stack and Enabled w/PXE option are
enabled.
Enable or disable the internal WWAN/GPS device
By default, the option is enabled.
Enable or disable the internal WLAN device
By default, the option is enabled.
Enable or disable the internal Bluetooth device
By default, the option is enabled.
Enable or disable the internal Contactless smartcard/NFC device
By default, the option is enabled.
Enable or disable UEFI Network Stack and controls the on-board LAN
Controller.
By default, the Enable UEFI Network Stack option are enabled.
Sense the connection of the computer to a wired network and subsequently
disable the selected wireless radios (WLAN).
BIOS Setup
135
Advertisement
Table of Contents
