Advertisement
Operations
ReadyTools™
Your deep cleaner comes equipped with a hose
and at least one attachment for cleaning stairs,
upholstery, and more.
Important! If using the machine to clean
upholstery, check upholstery tags.
1. Check manufacturer's tag before cleaning. "W" or
"WS" on the tag means you can use your deep cleaner.
If the tag is coded with "X" or "S" (with a diagonal strike
through), or says "Dry Clean Only," do not proceed. Do
not use on velvet or silk. If manufacturer's tag is missing
or not coded, check with your furniture dealer.
2. Check for colourfastness in an inconspicuous place.
3. If possible, check upholstery stuffing. Coloured stuffing
may bleed through fabric when wet.
4. Plan activities to give upholstery time to dry.
5. Vacuum thoroughly to pick up loose debris and
pet hair. Use a vacuum with a brush attachment and a
crevice tool to clean in fabric folds and tufts.
6. To begin cleaning with attachments, follow the
instructions on page 8 for filling the 2-in-1 water tank.
7. Set the ReadyTools dial to the TOOLS setting. This will
allow spray and suction from the hose.
8. Attach the cleaning tool to the end of the hose.
9. Clean by pressing the spray trigger to spray solution
onto the area to be cleaned. Slowly move the tool back
and forth over the soiled surface. Release the spray
trigger to suction dirty water. Continue to clean in the
area, working in small sections until dirt is removed.
Caution: Do Not Overwet.
10. When finished cleaning, remove and rinse tool(s) in
clean, running water.
11. It is recommended that you suction clean water from
a bowl to rinse out the hose.
12. Before wrapping hose onto tool rack, lift end of hose
and stretch out to ensure all water is cleared from hose.
13. Wrap flex hose around tool rack.
14. Empty 2-in-1 water tank and rinse out, following
instructions on pages 9.
15. If the ReadyTools dial becomes difficult to turn, the
diverter assembly that holds the dial may need to be
cleaned. To clean, first remove nozzle and locate screw
that holds the diverter assembly in place. With a Phillips
screwdriver, remove the screw and set aside.
16. Remove diverter assembly; hold under running water
making sure water flows through and around dial. Turn
dial about 10 times clockwise and 10 more times counter
clockwise to free up any debris.
17. Wipe diverter assembly with a soft cloth
and replace back on machine. Replace nozzle.
18. Return ReadyTools dial to FLOOR CLEANING setting.
IMPORTANT
Check for colourfastness in an inconspicuous place. If
possible, check upholstery stuffing. Coloured stuffing
may bleed through fabric when it becomes wet.
Manufacturer's tag
Tip
» To clean with sliding crevice
tool, slide brushes forward to
clean stain, slide back to suction
7.
11.
www.BISSELL.com
12.
9
Advertisement
