Table of Contents
Advertisement
Hour Meter
The hour meter displays the total operating time with
the blade activated.
The display on the hour meter will turn on the oil can
icon after every fifty hours of use and will stay on
for two hours or until the meter is manually reset. To
manually reset the timer, turn the ignition key to the
run position and then engage and disengage the
blade switch five times at one second intervals.
Choke Control
The choke control is used for cold starts in order to
provide the engine with a richer fuel mixture.
For cold starts the control should be pulled out to its
extent.
Tracking Knob
If the mower is not tracking straight, check the
air pressure in both rear tires. Recommended air
pressure is 15 psi (1 bar) for all tires. Tracking must
be checked on a flat and level concrete or blacktop
surface.
Rotating the tracking knob allows fine tuning
adjustments so the machine tracks straight with the
steering control levers in the full forward position.
Rotate the knob clockwise (as viewed from the
operation position) to increase the speed on the left
lever. Rotate counterclockwise to decrease speed.
CONTROLS
Hour meter
Hour meter
Tracking knob
8058-214
8058-214
8058-182
19
Advertisement
Table of Contents
