Convergence - Sony KV-27V10 Service Manual

3-2. CONVERGENCE
Preparation :
© Before starting this adjustment, adjust the focus,
horizontal size, and vertical size.
© Minimize the brightness setting.
© Provide dot pattern.
(1) Horizontal and Vertical Static Convergence
Center dot
V.STAT|
Magnet
H.STAT|
RV702 SCREEN
1. V.STAT Adjustment
Turn the V. STAT tabs to left or right so that the
vertical red, green and blue dots converge in the
center of the screen.
2. H.STAT Adjustment
Simultaneously turn the 2 V. STAT tabs in the
same direction so that the horizontal red, green
and blue dots converge in the center of the screen.
Note : Do not move the purity tab during adjustment
with the V. STAT tab. If the purity tab is moved,
the convergence condition will change, and
possibly lead to misadjustment of a different
yoke.
KV-27V10/27V15
RM-Y117 RM-Y121/AM-CM101
KV-29V10C/29V10M/32V15
RM-YI17 | RM-Y117 RM-Y124
RM-CM101
@ Tilt the V.STAT tabs and adjust the static
convergence by turning the V.STAT tabs to the
left or right.
rs ~
4. The V.STAT tabs are moved in the direction of
the @ and © arrows and the red, green and blue
points move as shown below.
® ® ®
oo | t mae
R { rot
3)
®
— 29 —