Table of Contents
Advertisement
Connecting Example 1
Connecting Example 2
To Connect a Combination VHF/UHF Antenna
To Connect a VHF Antenna Only
If the antenna cable is a
300-ohm twin lead (flat)
type
Antenna connector
|
=
(supplied)
if the antenna cable is a
75-ohm coaxial (round)
type
| !
F-type connector
: i
(not supplied)
VHF/UHF
* Use an RFC-8
external cable (not
supplied), 8m (25 ft)
long, if the supplied
75-ohm coaxial cable
is not long enough.
F-type
connector
(not supplied)
VHF/UHF IN
ees
VHF/UHF iN
VHF/UHF OUT
75-ohm coaxial
cable *
(supplied)
75-ohm coaxial cable
EAC-66 U/V
L
(supplied)
band separator
(mixer)
(not supplied)
75-ohm coaxial
cable (supplied)
VHF/UHF
1 Disconnect the TV antenna cable from the TV and
1 Disconnect the TV antenna cable from the TV and
connect it to the VCR.
connect it to the VCR.
2 Connect the VCR and the TV.
If the antenna cable is a 75-ohm coaxial (round) type
Use an F-type connector (not supplied).
lf your TV has a single terminal for the VHF/UHF
antenna
If the antenna cable is a 300-ohm twin lead (flat) type
Connect directly using the supplied 75-ohm coaxial
Use the antenna connector (supplied).
cable.
2 Connect VHF/UHF OUT on the VCR and the VHF
If your TV has separate VHF/UHF antenna terminais
antenna terminal on the TV with the 75-ohm coaxial
Use a U/V band separator.
cable (supplied).
How to attach the U/V band separator and the F-type
How to attach the antenna connector and an F-type
connector
connector
43
See page 17.
See page 17.
Advertisement
Table of Contents
