Table of Contents
Advertisement
-@-
Playing a Tape
22 | Basic Operations
'This section shows you how to insert a video cassette and to play it. More
convenient functions you can use while playing a tape are described in
"Additional Operations" on page 36.
Inserting a video cassette
Press ©, PROGR +/~ or namber buttons on the remote control, or PROGR
+/-on the video TV when the © lamp is lit in red (indicating that the
video TV is in standby
mode).
Gently insert a cassette with the arrow indication facing upwards. The
cassetie is automatically loaded into the cassette compartment.
'The BV indicator appears on the screen and stays tntil the cassette has
been loaded.
'The video TV tums on automatically when it is in standby mode. If you
insert a cassette with its safety tab removed, playback starts.
Ejecting a video cassette
Press EJECT 4 on the video TV or 4 on the remote control.
'The G2 indicator appears and stays until the cassette is ejected.
'You can eject the cassette even if the power isin standby.
Protecting your cassette against
accidental erasure
'The cassette is provided with a safety tab to protect against accidentally
erasing a previous recording. Break off the safety tab with a screw driver
cr a similar tool to prevent recording.
If the eafety tab is removed, the cassette is jected when you try to record
onit.
To record on a cassette with the safety tab broken off, simply cover the tab
adhesive tape.
@is FS
Playing a tape
1 Ifthe © lamp on the video TV is lit in red (indicating that the video TV is in
standby mode), press OQ, PROGR +/- or a number button on the remote
'control.
2 Insert
the tape.
If you insert a tape with the safety tab removed, playback begins
immediately.
3 Press PLAY >.
several seconds.
'To stop playback
Press STOP i.
'The video TV returns to the normal TV picture.
'To stop playback
for a moment
Prese PAUSE Il. The picture
'Press PAUSE I again or press PLAY £>- to resume playback.
1 you leave your video TV in pause mode, normal playback resumes after
'about
5 minutes.
To fast forward
the tape
Press STOP @!, then press FF >>>.
To rewind
the tape
Press STOP @, then press REW <4.
To search a tape at high speed
'During playback, press and hold REW <€4 (rewind) or FF PP (fast
forward), A high-speed picture appears on the TV screen.
'To resume normal playback, release the bation.
'To view the picture in fast forward or rewind mode
Prese and hold FF B® during fast forward or REW <4 during rewind.
'While you hold the button, you can view the picture.
When you release the button, fast forward or rewind mode is resummed.
Resetting
the tape counter
'The tape counter helps you to locate a certain scene after playback. Press
(COUNTER RESET on the remote control to set the counter to "0:00:00"
Advertisement
Table of Contents
