Changing Basic Settings; Home Connect - Siemens SN55ZS07CE Information For Use

Basic setting
Wi-Fi
Remote Start
Factory setting
1
Factory setting (may vary according to model)
15.2 Changing basic settings
Tip: Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
Display text Selection
Cn:00 Cn:00 - Cn:01
rc:01 rc:00 - rc:02
rE: Start with
Y:ES
Confirm with
Description
Switch the wireless network
connection on or off.
Level "Cn:00" switches the
wireless network connection
off.
This basic setting is not
available until you have con-
nected the appliance with
the Home Connect app.
→ "Home Connect ",
Page 40
Activate or deactivate
→ "Remote Start ",
Page 41.
The following settings are
possible:
With the setting "rc:00",
¡
the function is perman-
ently deactivated.
With the setting "rc:01",
¡
the function can be selec-
ted via the
→ "Activating Remote
Start ", Page 41
With the setting "rc:02",
¡
the function is perman-
ently activated.
This basic setting is not
available until after you have
connected the device with
the Home Connect app.
→ "Home Connect ",
Page 40
Restore changed settings to
the factory settings.
The settings for initial start-
up must be configured.
Press ⁠ .
1.
To open the basic settings, press
2.
for 3 seconds.
The display shows H:xx.
a
The display shows
a
Basic settings en
button.
⁠ .
39