Advertisement
Install the tank lid and the seat. Use
the supplied hardware pack for seat.
Periodically check for leaks for several
days following the installation.
FILL FLOAT WITH
BALLAST
Test flush the toilet.
Periodically check all connections for
leaks for several days following
installation.
Set the tank cover in place on the tank.
CONTINUOUS CLEAN
1. Install and connect the CONTINUOUS CLEAN.
Refer to the illustration on
the right for the positions
of refill tube, fill valve,
flush valve and bowl
cleaner.
2. Function of the selection switch.
Switch is on
Water flows through the toilet bowl cleaner container and
carries water therein into the toilet.
1428439-T2-A
Fig.#13
13
Fig.#14
14
(
1.
Refer to the
illustration on the
right for structure
of flush valve.
Fig.#15
15
2.
Water directly flows into the toilet without passing
through the toilet bowl cleaner container.
Fig.#16
16
-6-
)
(
)
Place to connect
the water refill tube
Switch is off
Advertisement
