Philips 636 User Manual page 36

This menu features advanced settings
that you shouldn't have to change.
If the fields of these menus are empty, or
if you encounter connection problems,
contact your ISP.
Advanced
The SMPT authenticat.
in most European countries: your
Off
e-mails will NOT be sent if set to On.
Contact your provider for complete
information.
To select the type of network used
when launching a connection, and to
configure the corresponding settings.
Bearer
• GSM
only use the GSM or the GPRS
network for e-mail connections.
Network
•
GPRS
access
try to connect to the GPRS net-
work, then to the GSM network if
the GPRS network isn't available.
Selecting this option you need to have
both GSM
configured.
Messages
menu should be
or GPRS: your mobile will
first: your mobile will first
and GPRS settings
GSM Settings
To change the GSM settings:
• & Password,
Login
• Phone number (ISDN
needed to establish the connection
and provided by your operator,
• disconnect, a value of over 30
Auto
seconds after which the phone
disconnects
connection was in progress).
The lack of exchanges with the network
defines the inactivity time period
leading to auto disconnection.
GPRS settings
To change the GPRS settings (same
fields as the GSM settings). The
menu lets you enter the address of the
external network you will connect to.
Error messages during connections are mainly due to
incorrect parameters: contact your operator if needed
before first use, in order to have the correct settings.
or Analogic)
automatically (if a
APN
29