Table of Contents
Advertisement
How to update using a USB Mass-storage device
4. Turn the TV off/on to install the software automatically.
5. Unplug USB flash disk and Turn the TV off/on again.
6. Press "MENU" button, then press "0000" on the remote control to check the firmware
version.
file://C:\Documents and Settings\Alexsandr\Рабочий стол\Toshiba_40LV733F_sch\h...
Figure 4 Updating wizard 2
Figure 5 Unplug USB flash disk
Стр. 2 из 3
14.05.2015
Advertisement
Table of Contents
